Learn Current Electricity in depth & Basics of DC Circuits

Rating 4.25 out of 5 (51 ratings in Udemy)

What you'll learn

In part 1 you will learn some basic concepts of current electricity like current, voltage, resistor, etc along with introduction to Thinkercad software.
In part 2 you will learn different techniques to solve complex circuits along with simulation of that circuits on the thinkercad software
Network Theory concepts (Mesh, super-mesh, Nodal analysis, Voltage and current divider techniques, Thevenin's and Norton's theorem) …

Rating 4.25 out of 5 (51 ratings in Udemy)

What you'll learn

In part 1 you will learn some basic concepts of current electricity like current, voltage, resistor, etc along with introduction to Thinkercad software.
In part 2 you will learn different techniques to solve complex circuits along with simulation of that circuits on the thinkercad software
Network Theory concepts (Mesh, super-mesh, Nodal analysis, Voltage and current divider techniques, Thevenin's and Norton's theorem)
Simulation of different circuits on Thinkercad software
You will learn to operate voltmeter, ammeter and multimeter
You will learn how to measure voltage and current of any circuit and resistance of any resistor
You will learn how to generate different ac signals like Sine wave, Square wave and Triangular wave
You will be able to convert any complex circuit into it's simple form

Description

After completing the course, if you want to learn more advanced concepts of electronics then I recommend you enrolling in my courses.

divided this course into two parts. In the first part, you will be learning some basic concepts of current electricity in great depth and an introduction to thinkercad software. After completing 1st part you will start 2nd part and in that, you will be learning the complex circuitry and its simulation on the thinkercad software. I will not only teach you the traditional methods to solve the complex circuitry but at the same time, I will also provide you with some shortcut tricks which help you to solve that circuit quickly.

Part-1:- Current Electricity and introduction to the Thinkercad software

1) Difference between conductors and insulators

2) What is a current?

3) What is a resistor and how to find its value?

4) What is Voltage?

5) What is power and how we can calculate it?

6) Difference between Ac and Dc Circuits?

7) Ohm's Law with experiment

8) Series and Parallel circuits + Numericals

After lecture 7th you will be introduced to the thinkercad software.

Part-2:- Electrical Circuits and its simulation in Thinkercad software

1) What are nodes meshes and loops?

2) KVL and KCL rule

3) Mesh analysis

4) Supermesh analysis

5) Nodal analysis

6) Voltage and Current divider rule

7) Thevenin's Law

8) Norton's Law

Simulation on Thinkercad Software

Duration 9 Hours 58 Minutes

Paid

Self paced

Beginner Level

English (India)

352

Rating 4.25 out of 5 (51 ratings in Udemy)

Go to the Course
We have partnered with providers to bring you collection of courses, When you buy through links on our site, we may earn an affiliate commission from provider.